JLG 24RS Service Manual - Manual (Page 76)

SECTION 3 - CHASSIS & TURNTABLE
3-38 – JLG Lift – 3121287
3. Apply JLG threadlocker P/N 0100019 to the pivot bolt
and torque to 280 Nm (206.5 lbs.ft.).
4. If engaged, remove the turntable lock pin.
5. Apply JLG threadlocker P/N 0100019 to the other swing
drive mounting bolts and torque to 40 Nm (30 ft.lbs.).
6. Tighten the jack bolt until the pinion is snug against the
shim and bearing and then loosen the jack bolt.
7. Torque the jack bolt to 68 Nm (50 ft.lbs.).