JLG 24RS Service Manual - Manual (Page 84)

SECTION 3 - CHASSIS & TURNTABLE
3-46 – JLG Lift – 3121287
9. Attach chains or slings to the lifting lugs to support the
weight of the turntable.
10. Remove the bearing bolts securing the turntable to the
bearing.
11. Lift the turntable off of the chassis.
12. Place the turntable assembly on adequate blocking.
13. Remove the outer race bearing bolts from the underside
of the frame.
14. Install lifting eyes into the swing bearing for removal.
NOTE: The swing bearing weighs approximately 132 lbs. (60 kg).
15. Attach an adequate lifting device to the swing bearing
and remove it from the frame.