JLG 4017PS Service Manual - Manual (Page 165)

9-7 3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7
Electrical System
9.5.2 Personalities
Fan Reverse
Timer: 2sec
2sec To 10sec
Access Level
1, 2, or 3;
Hydraulic
Variable
Speed Fan or
Reversing Fan
configured Sets the length of time that the fan will be reversed
(cycling or demand)
Fan Reverse
Interval: 20min
5min To 60min Sets the interval between cycling fan reversals
Tyre Selection:
Access Level
1, 2, or 3 Selects the tyre fitted for proper vehicle speed calibration
(refer to Vehicle Speed Calculation)
Default Gear
Selection: 2
1, 2, 3, 4
Access Levels
1,2,3
Sets the default transmission gear at power-up
ECM Service
Tool Access?
ECM Tool
Access?
Yes: Enter,
No: ESC
Access Level 1
When YES, the UGM shall not transmit CANbus
messages. This will allow maximum bandwidth for Deutz
service tools during re-programming. Power cycle is
required to resume normal operation.
Function Description Default Value
Main Lift Allows the owner to adjust the Max Lift Up and Max Lift Down
function speeds 1400 mA (up)
1600 mA (down)
Soft Lift Allows the owner to adjust the derate value when the boom
enters the soft lift zone 40%(3706PS, 33.7 & 37.6)
45% (3707PS & 37.7)
35% (4014PS & 4017PS)
Telescope Allows the owner to adjust the Max Tele In and Max Tele Out
function speeds 1300 mA
Fork Tilt Allows the owner to adjust the Max Fork Tilt Up and Max Fork
Tilt Down function speeds 1150 mA
Platform Level Allows the owner to adjust the Max Platform Level Up and Max
Platform Level Down function speeds 800 mA
Platform Rotate Allows the owner to adjust the Max Platform Left and Max
Platform Right function speeds 1000 mA
Platform Lift Allows the owner to adjust the Max Platform Lift Up and Max
Platform Lift Down function speeds 1020 mA (up)
960 mA (down)
Platform
Telescope Allows the owner to adjust the Max Platform Tele In and Max
Platform Tele Out function speeds 1000 mA (in)
1080 mA (out)
Outriggers Allows the owner to adjust the Max Outrigger Up and Max
Outrigger Down function speeds 1000 mA
Frame Level Allows the owner to adjust the Max Frame Level Left and Max
Frame Level Right function speeds 1000 mA
Bucket Lift Allows the owner to adjust the Max Bucket Up and Max Bucket
Down function speeds 1400 mA (up)
1600 mA (down)