Det-Tronics EagleVision - PC User Manual
Page 102
EagleVision-NT provides four levels of security protection, with each
level allowing access to different EagleVision-NT features. Refer to Table
XI–1.
1. Enter a name and password for each user:
With the Security screen displayed, click on the Add button. Enter a
user’s name in the User ID box and a password in the Password
box. Enter the same password in the Confirm Password box. The
“Password” and “Confirm Password” entries must match exactly to
be accepted. Click on the Accept button. The name of each user is
added to the user list in the upper right hand portion of the Security
screen. Repeat the process for each user.
2. Assign an access level for each user:
Select the user’s name from the list in the upper right hand portion
of the screen, then select the appropriate access level in the box at
the lower left hand part of the screen. Click on the Accept button.
Repeat the process for each user.
3. Activate security.
Click on the Force Passwords check box. The “Force Passwords”
check box functions as an “On/Off” switch for the Security feature.
When “Force Passwords” is checked, the security feature is opera-
tional. When it is not checked, EagleVision-NT will not request a
password to gain entry.
4. When all entries have been made, click on OK. The System
Diagnostic screen is displayed.
11.2
S
ECURITY
Point Point LON
Download
Logic
Upload
Quit
Display
Configure Override
Administrator
X
X
X
X
X
X
X
Fire Engineer
X
X
X
X
X
X
X
Engineer
X
X
X
X
X
Operator
X
TABLE XI-1
EagleVision-NT Security
E
STABLISHING A
U
SER
L
IST