Det-Tronics EagleVision - PC - Manual (Page 37)

3. Click on Accept. Click on Close to exit and return to the Point
Configuration screen.
After the configuration data is entered and saved in the EagleVision-NT
database, it must be downloaded to the gateway. Refer to the Point
Configuration screen, Figure V–1.
D
OWNLOAD
A
LL
When all the point configuration data has been entered, select
“Download All” to sequentially download the point configuration data
from the EagleVision-NT database to the gateway. Status messages
appear during the downloading process. The gateway will then transfer
the configuration data to the individual network devices.
For the gateway to respond to additions/modifications to the configu-
ration database, the configuration data must be downloaded.
NOTE
Logic controllers must be placed in Reset/Program mode while
downloading data.
U
PLOAD
A
LL
Point configuration data can be uploaded from an existing gateway that
has previously been configured.
Select “Upload All” to upload the point configuration data from the
gateway to replace the data currently in the EagleVision-NT database.
Status messages appear during the upload process.
CAUTION
“Upload all” will overwrite the current data files in the
EagleVision-NT database.
D
OWNLOAD
O
NE
Select “Download One” to download the configuration data for the
selected point to the gateway. Status messages appear during the down-
loading process. The gateway will then transfer the configuration data
to the individual network device.
U
PLOAD
O
NE
Select “Upload One” to upload the selected point configuration from the
gateway. Status messages appear during the upload process.
95-8479
5.21
E
AGLE
Q
UANTUM
S
YSTEM
C
ONFIGURATION
D
OWNLOADING AND
U
PLOADING
D
ATA