Det-Tronics EagleVision - PC - Manual (Page 47)

AND Gate
Eight input logical “AND” gate.
To place an AND Gate, select this tool, then click on the location where
it will be placed.
Unused inputs are evaluated as a “1.”
OR Gate
Eight input logical “OR” gate.
To place an OR Gate, select this tool, then click on the location where
it will be placed.
Unused inputs are evaluated as a “0.”
NOT Gate
Logical inverter. A “1” in = a ”0” out.
To place a NOT Gate, select this tool, then click on the location where
it will be placed.
Less Than Gate
Less than “n” gate. Accepts a single integer input from a Binary Adder
or Integer Counter, compares it to “n” and creates a binary output.
To place a Less Than Gate, select this tool, then click on the location
where it will be placed. To assign a value to “n,” double click on the
gate, then enter the value in the Preset box.
Greater Than Gate
Greater than “n” gate. Accepts a single integer input from a Binary
Adder or Integer Counter, compares it to “n” and creates a binary out-
put.
To place a Greater Than Gate, select this tool, then click on the location
where it will be placed. To assign a value to “n,” double click on the
gate, then enter the value in the Preset box.
Equals Gate
Accepts a single integer input from Binary Adder or Integer Counter,
compares it to “n” and creates a binary output.
95-8479
5.31
E
AGLE
Q
UANTUM
S
YSTEM
C
ONFIGURATION