Det-Tronics EagleVision - PC - Manual (Page 65)

Relay Board
See Figure VII–4. Each Relay board has 4 unsupervised output circuits.
CPU Reset — status is activated for 60 seconds when the board is
reset from power-up, by the watchdog timer, or by pressing the reset
switch on the board.
Not Communicating — board is not responding.
Agent Release Board
See Figure VII–5. Each Agent Release board has one release output and
three supervised signal audible outputs. The first three indicators show
the status of the release output — open, active or isolated.
CPU Reset — status is activated for 60 seconds when the board is
reset from power-up, by the watchdog timer, or by pressing the reset
switch on the board.
Wrong Configuration — the software configuration does not match
the S3-1 DIP switch setting on the board (Initiator/Solenoid).
7.8
E
AGLE
Q
UANTUM
P
OINT
D
ISPLAYS
FIGURE VII-3
LIOU Sounder Board
Point Display Screen
FIGURE VII-4
LIOU Relay Board
Point Display Screen