Det-Tronics EagleVision - PC - Manual (Page 44)

D
RAWING
L
INES
To connect points on the drawing, place the cross icon on one point,
then drag to the other point.
To delete a line, use the pointer tool, click on the end of the line that is
an input connection to a gate, then drag the line off the connection and
release. The line will be deleted.
C
OLORING
To color a gate or the box surrounding the text field, select the object to
be colored, then select the desired color from the palette in the upper
right hand corner of the screen.
R
ENUMBERING
G
ATES
Each gate is numbered sequentially as it is placed on the logic page.
To change gate numbers, select Gate Order under the Edit menu. Place
the cursor on the gate to be renumbered, then click. The number to the
right of the cursor will be applied to the gate.
D
ETERMINING
G
ATE
S
TATUS
To determine the current status condition of the gates on a logic page,
select Status under the View menu. The input / output status (digital “0”
or “1”) will be displayed for each gate. Click on Status again to return
to the Normal screen view.
L OGIC E LEMENTS
Refer to Figure V-19 for identification of the logic tools.
5.28
E
AGLE
Q
UANTUM
S
YSTEM
C
ONFIGURATION