Det-Tronics EagleVision - PC User Manual
Page 34
Advertising
Agent Release Module Configuration
1. Highlight the first Agent Release module.
2. Click on the Edit button. The Agent Release Configuration screen is
displayed. See Figure V–13.
3. Select the release mode for the release output.
4. Check the appropriate box if the silence function is desired for the
three signaling outputs.
5. Click on OK to return to the Logic Controller Configuration screen.
6. Repeat for each Agent Release module in the LIOU.
Sounder Module Configuration
1. Highlight the first Sounder module.
2. Click on the Edit button. The Sounder Card Configuration screen is
displayed. See Figure V–14.
5.18
E
AGLE
Q
UANTUM
S
YSTEM
C
ONFIGURATION
FIGURE V-13
Agent Release
Configuration Screen
Advertising