1 iqm-233 card installation – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual User Manual
Page 28
2 - 6
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
2.1.2.1 IQM-233 Card Installation
WARNING - Risk Of Electric Shock
Turn off the computer and disconnect the power cord
before continuing.
CAUTION - Static Sensitive Device
Follow proper ESD precautions.
1
Remove the computer’s cover.
2
Remove the blank panel from the computer’s rear panel adjacent to any empty
PCI Express slot.
3
Align the IQM-233 card’s gold-plated edge connector with the PCI Express slot
while aligning the IQM-233 card’s bracket with the opening in the computer’s
rear panel. See
.
4
Push down on the top of the IQM-233 card until the edge connector is fully
inserted into the PCI Express slot.
Figure 2-4 IQM-233 card in PCI Express slot
5
Secure the IQM-233 card’s bracket to the computer’s rear panel.
6
Repeat steps 2 through 5 if additional IQM-233 cards are being installed.
7
Replace the computer’s cover.
8
Connect the power cord and turn on the computer.
9
Start the IQM-233 Standard software.
PCI Express slot
(any size)