INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual - Manual (Page 36)

2 - 14
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
Figure 2-14 Source output cable - 15-pin high-density male D-sub connector
2 Connect the D-sub connector end of the source output cable to the
IQM-233 card. See
Figure 2-15 .
Figure 2-15 Source output cable
Pin 8 Ground
Pin 9 Ground
Pin 10 Ground
Pin 11 Ground
Pin 12 Ground
Pin 13 Not Used
Pin 14 Not Used
Pin 15 Not Used
Table 2-2 Source output pin assignments (continued)
High-Density D-sub Function
Output 1 Output 2 Output 3
Ground
Source Output Cable