2 sensor connections – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual User Manual
Page 31
Advertising
2 - 9
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
2.1.2.2 Sensor Connections
1
Connect the SMA/BNC adapter cable to the desired SMA connector on the
IQM-233 card. See
.
2
Connect one end of the SMA/BNC adapter cable to the long BNC cable.
Figure 2-7 SMA/BNC adapter cable and long BNC cable
3
Connect the other end of the long BNC cable to the oscillator’s INSTRUMENT
BNC connector. See
4
Connect one end of the short BNC cable to the oscillator’s FEEDTHRU BNC
connector.
Figure 2-8 Cable connections to oscillator
Long BNC Cable
SMA/BNC Adapter Cable
Sensor 1
Sensor 2
Sensor 3
Short BNC cable
Long BNC cable
to FEEDTHRU
to INSTRUMENT
Oscillator
Advertising