2 iqm-233 standard window introduction, Layed. see, Figure 3-7 – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual User Manual
Page 47
Advertising
3 - 7
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
Figure 3-7 IQM-233 Standard window - Sensor Information and Source Information panes
3.3.2 IQM-233 Standard Window Introduction
The IQM-233 Standard window contains a Sensor Information pane and a
Source Information pane. See
NOTE: The Source Information pane is only available when the Control
Enabled check box is selected in the Setup window. Refer to
3.3.3.1.2, General, on page 3-10
Figure 3-8 IQM-233 Standard window
The Sensor Information pane displays material thickness, deposition rate, crystal
frequency, and estimated remaining life of the crystal, for up to three individual
sensors. See
section 3.3.4.1, Sensor Information Pane Readouts, on page 3-19
.
Advertising