Leica Biosystems ST5020 - Manual (Page 30)

30 Instructions for Use, V1.9, RevD - 12/2012
5. Operation
5.2 Setup checklist
Once the instrument is ready to be switched on, all menus listed below must be accessed
and the necessary parameters be properly selected. The Supervisor mode must be active
to have access to all menus. For detailed advice on how to select individual parameters,
refer to the on-line help feature.
Parameter settings Screen
→
Press button
→ →
→ →
→ →
→
→ →
Allocate a CLIP COLOR to each clip.
In MOVE, select the number of dips and the speed of
the transfer arm.
Create the PROGRAMS needed.
Existing programs can be copied and modified.
Open the REAGENT LIST menu, check the settings
and complete, if necessary.
Verify whether DATE and TIME are correctly set.
Select a language - either when switching the in-
strument on or in the LANGUAGE CHOICE menu.
In USER INTERFACE, set parameters as required.
↓
→ →
→ →
Select time, quantity and paper format of the daily
printouts.
In INSTRUMENT STATUS, select a STATION TYPE
for each station.
Allocate the correct reagent to each STATION.
Reagents can be allocated either when creating the
programs or in the STATION DETAILS menu.
Be sure to fill the reagent containers with the cor-
rect reagents (as allocated)!
→
↓
←