Leica Biosystems ST5020 - Manual (Page 68)

68 Instructions for Use, V1.9, RevD - 12/2012
5. Operation
5.7 Programs in process
PROGRAMS IN PROCESS is a table listing all programs currently in progress. It can be
displayed instead of instrument status, as PROGRAMS IN PROCESS also provides infor-
mation on all important run times.
→ →
or
The table contains the following
information:
Rack
Rack number - as in instrument
status.
Staining protocol
3-Digit code and clip color allo-
cated to a program.
Station
Indicates current rack position.
GA means that a rack is current-
ly being transferred.
Exact (yes/no)
Provides information on whether
a step has been defined as “ex-
act“ or “non-exact“.
Fig. 65
Remaining station time
Shows the remaining immersion time of the rack
in the station.
Total remaining processing time
Total time remaining for the rack until the cur-
rent program is completed.
All times are based on defined program step
times and do not include any delays caused by
non-exact steps. Times displayed are updated
each sec. as well as each time a new racks
starts being processed.
Increasing rack
number
Press SORT to switch back and forth between
two sorting options: by rack number and by total
remaining processing time - the button will
change accordingly.
List sorted by:
↔
Total remaining
processing time