7 reagent list, Reagent list, Operation – Leica Biosystems ST5020 User Manual
Page 46
46
Instructions for Use, V1.9, RevD - 12/2012
Adding a reagent to the list
5.
Operation
5.4.7 Reagent list
Fig. 43
→
→
•
There is a default list of standard reagents
containing all reagents needed for the most
common staining methods.
•
All reagents are listed in alphabetical order.
A blue background indicates that a reagent
has been selected.
•
Before you allocate any reagents to any pro-
grams, make sure to update the reagent list
according to the reagents actually used, i.e.
add reagent names that are not part of the
list and delete reagents that are not used.
•
The Reagent - Management - System (RMS)
can be switched on / off in this menu.
The reagent list is an integral part of the user interface and can therefore be accessed
from several different menus. Adjust it to the current reagents as soon as possible, as this
makes programming considerably easier.
←→
•
Press NEW - the keyboard opens up.
•
Enter the name of the new reagent and confirm.
Up to 20 characters per reagent can be entered.
•
The new reagent will be added to the table where it alphabeti-
cally belongs and highlighted with the blue bar.
The alphabetical sorting function distinguishes between
small and capital letters as per the ASCII code. Capital
letters precede lower case letters.
↓
↓