Leica Biosystems ST5020 - Manual (Page 81)

81 Leica ST5020
Replacing the fuses
1
2
• Insert a screwdriver (1) into the slot on fuse
holder (2) and push slightly inwards rotating
the screwdriver 1/4 turn to the left at the
same time.
• The fuse holder is released and can be re-
moved.
2
3
• Remove the defective fuse (3) from the fuse
holder (2) and insert the correct type re-
placement fuse.
• Reinsert the fuse holder together with the
fuse into the instrument housing. To lock the
fuse holder in place, insert the screwdriver
into the slot, push slightly inwards and rotate
1/4 turn to the right at the same time.
Fig. 73 Fig. 74
7. Troubleshooting