6commissioning – Lenze E84Dxxxx User Manual
Page 29
![background image](/manuals/565921/29/background.png)
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
29
6
Commissioning
6.3
Setting the IP configuration of the Inverter Drive 8400 protec
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.1
Setting via the EtherNet/IP configurator of the »Engineer«
How to set the IP parameters via the EtherNet/IP configurator:
1. Execute the menu command Online PROFINET /EtherNet/IP configurator addresses ....
The "Assign IP addresses" dialog window is opened and all Lenze EtherNet/IP nodes
connected are listed.
Note!
• Changes in the IP parameters will become effective immediately.
• An already existing IP connection to the Inverter Drive 8400 protec is interrupted.