Lenze E84Dxxxx - Manual (Page 48)

8 I/O data transfer (implicit messages)
8.4 I/O configuration in the »Engineer«
48
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4 I/O configuration in the »Engineer«
Lenze technology application / configuring user-definable parameter sets

How to configure the Lenze technology applications / user-definable parameter sets in the
»Engineer«:
1. Select or change the application (C00005) in the Application parameter tab.
In the example, the "speed actuating drive" application (C00005 = 1000) is configured.
• Click the application button:
switch-off positioning
speed actuating drive
table positioning
• Select the application in the "Insert application" dialog box.
2. Make the default setting of the I/O configuration.
Select "MCI" control mode (C00007 = 40).