C13017 | ethernet config control, C13018 | multicast config alloc control, C13019 | multicast config ttl value – Lenze E84Dxxxx User Manual

Page 92: Icast ttl value, C13019, C13018, 13 parameter reference

Advertising
background image

13

Parameter reference

13.1

Parameters relevant for communication

92

Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C13017

C13018

C13019

Parameter | Name:

C13017 | Ethernet Config Control

Data type: UNSIGNED_16

Index: 11558

d

= 2D26

h

Setting of the baud rate for the Ethernet connections

Connection via RJ45 socket: Dependent on the configuration of the Ethernet port of the device to be connected, we

recommend to use a cross-over cable.

EtherNet/IP connection via the RJ45 socket ( 19)

Selection list

0 Auto-Negotiation
1 10 Mbps
2 100 Mbps
3 Reserved
4 Reserved
5 10 Mbps/Half Duplex
6 10 Mbps/Full Duplex
7 100 Mbps/Half Duplex
8 100 Mbps/Full Duplex
9 Reserved

10 Reserved
11 Reserved
12 Reserved

Subcodes

Lenze setting

Info

C13017/1

0: Auto-Negotiation

Ethernet setting port X31

C13017/2

0: Auto-Negotiation

Ethernet setting port X32

Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13018 | Multicast Config Alloc Control

Data type: UNSIGNED_8

Index: 11557

d

= 2D25

h

Selection for multicast IP addressing via instance attribute 9 (Mcast Config) in the

TCP/IP Interface Object (245 /

0xF5) ( 124)

Selection list

(Lenze setting printed in bold)

0 Default Allocation Algorithm
1 Multicast IP Start Address

Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13019 | Multicast Config TTL Value

Data type: UNSIGNED_8

Index: 11556

d

= 2D24

h

Setting of the multicast TTL value for the validity time of data packets in the EtherNet/IP network

(Instance attribute 8 (TTL Value) in the

TCP/IP Interface Object (245 / 0xF5) ( 124)

)

Setting range

(min. value | unit | max. value)

Lenze setting

1

255 1

Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Advertising