Lenze E84Dxxxx - Manual (Page 52)

8 I/O data transfer (implicit messages)
8.4 I/O configuration in the »Engineer«
52
Lenze · Decentralised frequency inverter 8400 protec (EtherNet/IP™ option) · Communication Manual · DMS 3.0 EN · 07/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Preconfigured signal combination in the "FB Editor"
The preconfigured signal combination is activated by setting code C00007 = "40: MCI" in the
standard device.
The function block editor (FB Editor) can be used to display the port blocks LP_MciIn and LP_MciOut
with the preconfigured signal combinations:
Here, signal combinations can be added or changed.

Reference manual / online help for Inverter Drives 8400 protec
Here you will find detailed information on the port/function block interconnection in
the »Engineer« and on the port blocks.