Lenze 8615E - Manual (Page 102)

C lame
for
Parameter (Factoty setting is printed in bold)
M o n i t o r i n g n o t a c t i v e
Monitoring active, sets trip
Monitoring active, sets warning
Rated power for temperature range up
to 50°C
Increased power for temperature
range
to 45°C
Maximum power for temperature
range up to 40°C
+ PRG
Display
8.1 Code set
All in the are arranged in different With
factory setting, the Standard set is activated. It contains all
which are required for the most common applications.
By selecting the extended set COOO, the display of
the keypad also those which are suitable for
applications.
There is also a Service set which is not accessible in general.
Password
If you want
your Parameter settings from non-authorized
access you enter a password in the form of a three-digit
number. By defining a password, the Parameters of the Standard
set only be read, but not when the password is
not entered. The Parameters of the extended set neither
be read nor
First enter the password CO94 and then set
“Standard set read After the setting of
only be when the programmed password is entered.
Code Name Parameter (Factory setting is printed in bold) Acceptance
Code set Standard set read only SH + PRG
Standard set
Extended set
Service set
C094’ User password 0 0 999 SH + PRG
INFO: 000 = No password request
extended set
100