Lenze 8615E - Manual (Page 143)

12.2 LECOM2 interface (Option)
For more sophisticated applications, you use a field bus
connecting interface. In the programming this interface is
called LECOM2. For the bus Interbus-S the connecting
2110 with the DRIVECOM is available. For the bus
PROFIBUS the connecting module 2130 is also available
with DRIVECOM The 2110 and 2130 are available
are and be integrated into the controller also page
52).
12.3 LECOM
Some have a meaning for the serial communication.
The C043, C068, C069, Cl61 to Cl68 be read on
the dispaly of the
12.3.1 Controller address
CO09 you enter the bus participant number for the
communication via interface. The addresses 1 to 99 be
assigned, but . . . are not possible.
12.3.2 Operating state
C068, the operating state is displayed.
E
bit no. 15 14 13 12 1 1 9 8
S i g n a l TRIP Act. Quick I M P D i r . o f Q m i n C o n t r o l l e r
= stop r o t a t i o n e n a b l e
Communication error Operating f a u l t
12.3.3 Controller state
C069, the controller state is displayed.
bit no.
S i g n a l
7 6 5 4 3 2 1 0
C t r l . xxx R E S E T AUTO REMOTE PCHG C-ALARM S-ALARM
e n a b l e
12.3.4 Pole pair number
You must enter the pole pair number to calculate the
Code
E
Parameter Meaning
Pole pair number
141