Lenze 8615E - Manual (Page 74)

3.7.2
control” is especially suited for machines with a large
breakaway torque. Compared to the V/f-characteristic control it
provides considerably larger torques up to the motor rated
The advantages of control be used especially for
drives. lt is also possible for group drives, provided that the motors
are of the same type and have the same load,
two identical
drives, drive a common shaft from two sides.
V/f-rated frequency
To the Io control, the and the correct
frequency must be set for the (see page 70).
You determine the using the , the rated motor
and the following diagram.
0.95
0.90
0 . 8 5
0 . 8 0
0 . 7 5
0 . 7 0 K
0 . 2 5 0 . 3 0 0 . 3 5 0 . 4 0 0 . 4 3 0 . 4 5 0 . 5 0 0 . 5 5
Example:
cos 0.85
=
Enter the calculated value For group drives, multiply
the calculated value with the number of motors.
C o d e setting is in bold) Acceptance
C O 1 5 Hz 7 . 5 H Z (0.1 Hz) 1 0 0
frequency 100 Hz 9 6 0
C O 2 0 =
0 . 0 A ( 0 . 1 100.0 A
as from 100 A
INFO: Adjustable from 0.0
72