Lenze 8615E User Manual
Page 114
9.8
Adjustment of the dancer-Position controller
9.8.1
Provision
The act. value
of the dancer-Position controller is set via the
terminals 3 and 4.
The input
is displayed as percentage
CO51 with
Cl72 =
In this
= 100%. The input
is resolved
with 12 bits
=
plus sign.
For the input of the dancer-Position setpoint, the dancer must be
adjusted normally to the desired operating Position. The percentage
be read
this value must be
into
(1
00%) and then entered
81.
Example:
CO51 = -48%
81 = -48% *
00%
The
between
and act. value value of the dancer
is entered into the PID controller as input value. When
the
direction of rotation
by
a reversing command via the
terminals 21 and 22 the input
of the PID controller is also
inverted.
Caution!
D
O
not reverse the direction of transport (coupling in the dancer-
control loop) by reversing the direction of rotation via the
digital inputs, terminals
For returning the material,
the
input
for the line
(main setpoint)
Code
Name
Parameter (Factory setting is printed in bold)
Acceptance
Act.
c o n t r o l l e r
v a l u e
INFO:
setpoint)
o.oov
-1o.oov
(0.01
V ON-LINE
controller
112