1 diameter detection – Lenze 8615E User Manual
Page 106
9.2
Control structure of dancer-Position control with
control
for winding drives
The following figure
the control structure of the dancer-
control with
control of the field frequency depending
on the
(CO05 =
or
Diameter
distance
f-sei + f-correction
Vset
f-set =
Diameter
Set
8600
Vset
digital frequency)
Block diagram: Winding with
detection and dancer
9.2.1 Diameter detection
The actual winding
is detected by a
and provided
to terminals 1 and 2 of the controller as an analog
0
This
either be used in non-contact Operation (e.g.
Sensors) in sampling Operation (e.g. sampling
Potentiometer).
The non-contact
detects the distance between the
and the circumference of the
and transmits the
to the
controller. The internal
detect the actual winding
radius also in this
104