8 minimum field, 9 maximum field – Lenze 8615E User Manual
Page 75
3.8
Minimum field
You
use
CO10 to
a
output frequency.
This
the influence of the analog
to
1 in
the factory-set configuration
= -0- (not for other
configurations).
1
,analog
100%
8
For
inputs via keypad or LECOM interfaces, the
setting is not
Name
Parameter (Factory setting is printed in bold)
Acceptance
Minimum field
Hz
0.0 Hz
(0.1 Hz]
100 Hz ON-LINE
frequency
1 0 0 H z
480 Hz
3.9
Maximum field
Via CO1 you
select a maximum field frequency between 7.5
and 480 Hz. The value will be a reference for the analog and
scaled
input and for the acceleration and deceleration
times. For absolute
input,
via keypad or JOG
frecluencies,
is the linlit
a
configuration with Pl
(CO05 =
the
output
be up to 200%
When you want to
the maximum field frequency in large
increments via the LECOM interfaces, first inhibit the Controller.
Code
Name
Parameter (Factory setting is printed in bold)
Acceptance
CO1 1
Maximum field 50 Hz
7.5 Hz
Hz)
100 Hz ON-LINE
frequency
480 Hz
73