Lenze E82EV 8200 vector 15kW-90kW - Manual (Page 163)

Extensions for automation
Modules
Mounting and dismounting function modules
6
l
163 EDK82EV903 DE/EN/FR 5.1
)
Note!
ƒ Keep the blanking cover
1 and the FIF protection cover 2 so that you can
attach them again after you have dismounted the function module.
– Without the FIF cover
2, the controller is inhibited.
– If no function module is plugged on, the controller without FIF cover
2 and
blanking cover 1 must not be commissioned (dangerous electrical voltage
at the FIF interface).
ƒ When two function modules are operated, make sure that the two
terminals X3/28 (controller inhibit) of the interfaces FIF I and FIF II are
AND’ed internally and must be wired according to their
application.(
¶ 166).