Lenze E82EV 8200 vector 15kW-90kW - Manual (Page 99)

l
99 EDK82EV903 DE/EN/FR 5.1
E82EV753K4B ... E82EV903K4B
(fold−out page on the right)
Scope of supply and connections
Position Description
0 8200 vector frequency inverter
1 Fixing bracket for standard mounting ^ 135
2 Blanking covers (2 pieces) for interfaces FIF I and FIF II ^ 162
3 EMC shield sheet with fixing screws for shielded control cables ^ 142
4 Cover with fixing screws
5 Shield clamp and strain relief for the motor cable ^ 154
6 Strain relief for the protective earth cable of the motor and the incoming cable of the motor tempera-
ture monitoring with PTC thermistor (PTC) or thermal contact (NC contact)
7 Label (required for mounting in accordance with UL) ^ 119
T1, T2 PTC connection or thermal contact (NC contact) of the motor ^ 154
U, V, W, PE Motor connection ^ 154
L1, L2, L3, PE Mains connection ^ 151
+U
G
, −U
G
DC supply
X1.2 Terminal strip for connection of relay output K1
^ 155
X1.3 Terminal strip for connection of relay output K2
X3.1 Terminal strip for connection of relay output K
SR
for "safe standstill" (only for variant Bx4x) ^ 157