Lenze SCD Series - Manual (Page 4)

1
1.0 GENERAL
1.1 PRODUCTS COVERED IN THIS MANUAL
This manual covers the AC Tech SCD Series Variable Frequency Drive.
1.2 PRODUCT CHANGES
AC Technology Corporation reserves the right to discontinue or make modifications to the design of
its products without prior notice, and holds no obligation to make modifications to products sold
previously. AC Technology Corporation also holds no liability for losses of any kind which may
result from this action.
1.3 WARRANTY
AC Technology Corporation warrants the SCD Series AC motor control to be free of defects in
material and workmanship for a period of twelve months from the date of sale to the user, or eighteen
months from the date of shipment, which ever occurs first. If an SCD motor control, under normal
use, becomes defective within the stated warranty time period, contact AC Technology's Service
Department for instructions on obtaining a warranty replacement unit. AC Technology Corporation
reserves the right to make the final determination as to the validity of a warranty claim, and sole
obligation is to repair or replace only components which have been rendered defective due to faulty
material or workmanship. No warranty claim will be accepted for components which have been
damaged due to mishandling, improper installation, unauthorized repair and/or alteration of the
product, operation in excess of design specifications or other misuse, or improper maintenance.
AC Technology Corporation makes no warranty that its products are compatible with any other
equipment, or to any specific application, to which they may be applied and shall not be held liable
for any other consequential damage or injury arising from the use of its products.
This warranty is in lieu of all other warranties, expressed or implied. No other person, firm or
corporation is authorized to assume, for AC Technology Corporation, any other liability in
connection with the demonstration or sale of its products.
1.4 RECEIVING
Inspect all cartons for damage which may have occurred during shipping. Carefully unpack equipment
and inspect thoroughly for damage or shortage. Report any damage to carrier and/or shortages to
supplier. All major components and connections should be examined for damage and tightness, with
special attention given to PC boards, plugs, knobs and switches.
1.5 CUSTOMER MODIFICATION
AC Technology Corporation, its sales representatives and distributors, welcome the opportunity to
assist our customers in applying our products. Many customizing options are available to aid in this
function. AC Technology Corporation cannot assume responsibility for any modifications not
authorized by its engineering department.