Lenze SCD Series - Manual (Page 65)

62
B.5 CLASS IMPLEMENTATION DETAILS
B.5.1 IDENTITY OBJECT - CLASS 0x01
B.5.2 MESSAGE ROUTER OBJECT - CLASS 0x02
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 1
1 GET VENDOR ID UINT 587
2 GET DEVICE TYPE UINT 2 (AC drive)
3 GET PRODUCT CODE UINT 1 (SCD drive)
4 GET MAJOR REV. USINT 2
MINOR REV. USINT 1
5 GET STATUS USINT 4 = Configured
5 = Owned
6 GET SERIAL NUMBER UDINT Unique 32-bit number
7 GET PRODUCT NAME ASCII String "AC Tech SCD Drive"
9 GET CONFIG. CONSISTENCY UINT EEPROM Checksum
INSTANCE 1
IDENTITY CLASS ATTRIBUTES
INSTANCE 0
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 1
1 GET CLASS LIST ARRAY List of Implemented Classes
2 GET MAXIMUM NUBER OF UINT 1
CONNECTIONS
3 GET CURRENTLY USED UINT 1
CONNECTIONS
4 GET CURRENTLY USED ID's Array of UINT List of Connection ID
INSTANCE 1
MESSAGE ROUTER CLASS ATTRIBUTES
INSTANCE 0
SERVICE SERVICE
CODE CLASS INSTANCE NAME
0x0E YES YES Get_Attribute_Single
0x05 NO YES RESET
IDENTITY CLASS SERVICES
IMPLEMENTED FOR