Lenze SCD Series - Manual (Page 80)

77
B.5.8 MOTOR DATA OBJECT - CLASS 0x28
B.5.9 CONTOL SUPERVISOR OBJECT - CLASS 0x29
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 1
2 GET NUMBER OF UINT 1
INSTANCES
1 GET NO. OF SUPPORTED USINT 7
ATTRIBUTES
2 GET ATTRIBUTE LIST ARRAY
3 GET / SET MOTOR TYPE USINT 0 - 10
6 GET / SET RATED CURRENT UINT RATED STATOR
CURRENT (0.1 A)
7 GET / SET RATED VOLTAGE UINT RATED BASE VOLTAGE
(V)
9 GET / SET RATED FREQUENCY UINT RATED FREQUENCY
(Hz)
15 GET / SET NOMINAL SPEED AT UINT NOMINAL SPEED
RATED FREQUENCY (RPM)
INSTANCE 1
MOTOR DATA CLASS ATTRIBUTES
INSTANCE 0
SERVICE SERVICE
CODE CLASS INSTANCE NAME
0x0E YES YES Get_Attribute_Single
0x10 NO YES Set_Attribute_Single
MOTOR DATA CLASS SERVICES
IMPLEMENTED FOR
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 1
2 GET NUMBER OF UINT 1
INSTANCES
CONTROL SUPERVISOR CLASS ATTRIBUTES
INSTANCE 0