Lenze SCD Series - Manual (Page 94)

91
WORD BYTE BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
0 FAULT DECEL ACCEL ROT. COM. RUNNING ENABLED
DIRECT. DIRECT.
1 FREQ. FREQ. FREQ. FREQ. LOCAL LOCAL LOCAL AT
SRC. SRC. SRC. SRC. SPEED
2
3
104 CUSTOM INPUT ASSEMBLY
0
1
ACTUAL SPEED SCALE 0-32767 (LOW BYTE)
ACTUAL SPEED SCALE 0-32767 (HIGH BYTE)
WORD BYTE BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
0 FAULT DECEL ACCEL ROT. COM. RUNNING ENABLED
DIRECT. DIRECT.
1 FREQ. FREQ. FREQ. FREQ. LOCAL LOCAL LOCAL AT
SRC. SRC. SRC. SRC. SPEED
2
3
4
5
6
7
2
VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C07 (Low Byte)
VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C07 (High Byte)
3
VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C08 (Low Byte)
VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C08 (High Byte)
105 CUSTOM INPUT ASSEMBLY
0
1
ACTUAL SPEED SCALE 0-32767 (Low Byte)
ACTUAL SPEED SCALE 0-32767 (High Byte)
NOTE 1: For Rotation and Commanded Direction, 1 = Forward and 0 = Reverse.
NOTE 2: Refer to the following tables for Local Bits and Frequency Source Bits representation.
NOTE 3: Actual Speed Scale: 0 = 0.0 Hz and 32767 = Max. Frequency (DNet ID 64; ACT par. 24).
WORD BYTE
0 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C05 (Low Byte)
1 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C05 (High Byte)
2 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C06 (Low Byte)
3 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C06 (High Byte)
4 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C07 (Low Byte)
5 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C07(High Byte)
6 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C08 (Low Byte)
7 VALUE OF DNET PARAMETER POINTED BY ACT PARAMETER #C08 (High Byte)
3
102 CUSTOM INPUT ASSEMBLY
0
1
2