Lenze SCD Series - Manual (Page 84)

81
B.6 DESCRIPTION OF DEVICENET TM PARAMETERS
Parameter ID 40 to 130 (AC Tech parameters 1 to 90) have been described in detail in Section 15.0 -
DESCRIPTION OF PARAMETERS.
DNET Par. ID 1 - OUTPUT FREQUENCY (READ ONLY): Actual output frequency to motor (0.1
Hz resolution).
DNET Par. ID 2 - OUTPUT VOLTAGE (READ ONLY): Actual output voltage to the motor (1 Volt
resolution).
DNET Par. ID 3 - OUTPUT CURRENT (READ ONLY): Output current to the motor (0.1 Amp
resolution).
DNET Par. ID 4 - ESTIMATED OUTPUT POWER (READ ONLY): In Watts (1 Watt resolution).
DNET Par. ID 5 - INPUT VOLTAGE (READ ONLY): In Volts (1 Volt resolution).
NOTE: DNET Parameters 2, 3, 4, and 5 are estimated and their accuracy depends on the accuracy of
the following parameters:
B.5.11 ACKNOWLEDGE HANDLER OBJECT - CLASS 0x2B
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 1
2 GET NUMBER OF UINT 1
INSTANCES
1 GET / SET ACKNOWLEDGE TIMER UINT 1 to 65535 ms
2 GET / SET RETRY LIMIT USINT 0 to 255
3 GET COS PRODUCING UINT 4
CONN. INSTANCE
INSTANCE 1
ACKNOWLEDGE HANDLER CLASS ATTRIBUTES
INSTANCE 0
SERVICE SERVICE
CODE CLASS INSTANCE NAME
0x0E YES YES Get_Attribute_Single
0x10 NO YES Set_Attribute_Single
ACKNOWLEDGE HANDLER SERVICES
IMPLEMENTED FOR