Lenze EMB934x - Manual (Page 76)

Preface and general information
Legal regulations
Terminology used
1
l
76 EDBMB9340 DE/EN/FR 12.0
1.2 Legal regulations
Labelling
Lenze EMB934x regenerative power supply modules are clearly identified by the indication
on the nameplate.
CE conformity
Conforms to the EC Low Voltage Directive
Application as directed
Regenerative power supply modules EMB934x
ƒ are units which can be used with Lenze controllers:
– 8200 vector frequency inverters E82XVXXXK4X (0.55 ... 90 kW, 400 V)
– 821X frequency inverters (8211 to 8218)
– 822X frequency inverters (8221 to 8227)
– 824X frequency inverters (8241 to 8246)
– 93XX controller (9321 to 9333)
ƒ must only be operated under the conditions prescribed in these Instructions.
ƒ are components
– for installation in a machine
– used for assembly together with other components to form a machine.
ƒ are electric units for the installation into control cabinets or similar enclosed
operating housing.
ƒ comply with the requirements of the Low−Voltage Directive.
ƒ are not machines for the purpose of the Machinery Directive.
ƒ are not household appliances but are intended exclusively as components for
further commercial use.
Drive systems with regenerative power supply module EMB934x
ƒ comply with the EMC Directive if they are installed according to the guidelines of
CE−typical drive systems.
ƒ can be used in industrial premises (PDS of category C3).
ƒ The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed as inappropriate!