Lenze EMB934x - Manual (Page 92)

Mechanical installation
Regenerative power supply modules EMB9341 and EMB9342
Mounting of EMB9341−E / EMB9342−E with fixing rails (standard)
4
l
92 EDBMB9340 DE/EN/FR 12.0
Installation steps
How to mount the regenerative power supply module EMB9341−E and EMB9342−E:
1. Drill holes into the mounting plate of the control cabinet for screwing the
regenerative power supply module:
– The condition of the wall and the mounting material must provide for the
mechanical connection to be long−lasting.
– Observe dimensions and distances of the drill holes .
– Allow a free space of 100 mm at the top and at the bottom.
– Vertical mounting position with mains connection on the top.
2. Push the fixing rails included in the accessory kit in the cardboard into the slots of
the heatsink.
3. Screw the regenerative power supply module and the mounting plate of the control
cabinet together.
– Provide for long−lasting mechanical connections.