Memmert ICH 256 Climate Chambers (Generation 2003) - Manual (Page 20)

20
Delivery, Transport and Setting Up
3. Delivery, Transport and Setting Up
3.1 Safety regulations
Warning!
You may injure your hands or feet when transporting and
setting up the cooled incubator. You should wear protective
gloves and work shoes.
Warning!
Because of the heavy weight of the cooled incubator, you could
injure yourself if you try to lift it.
If possible, only transport the appliance with a forklift truck or
manual pallet jack. The cooled incubator may only be moved using a
means of transport by persons who have the required qualification
for this (e.g. forklift truck licence). The cooled incubator may not be
transported with a crane.
If the cooled incubator needs to be carried, at least four persons are
required.
Warning!
The cooled incubator could fall over and seriously injure you. Never
tilt the cooled incubator and transport it only in an upright position.
Warning!
Never stack cooled incubators on top of each other. The cooled incu-
bator on top could fall off and seriously injure or kill someone.
Warning!
The cooled incubator may only be set up on the floor, and never on
tables or similar. A table could collapse or the appliance could fall
off and seriously injure or kill someone.
3.2 Transport
The cooled incubator can be transported in three ways:
►
on its own castors, for which the catch on the (front) castors must be released
►
with a forklift truck; move the forks of the truck entirely under the test chamber
►
on a manual pallet jack.