Memmert ICH 256 Climate Chambers (Generation 2003) - Manual (Page 3)

3
About this Manual
About this Manual
Purpose and target group
This manual describes the assembly, function, transport and operation of ICH 256 cooled
incubators. It is intended for use by personnel trained by the operator, who have the task of
operating and/or maintaining the cooled incubator.
If you are asked to work on the cooled incubator, read this manual carefully before starting
work on the unit. Familiarise yourself with the safety regulations. Only perform work that is
described in this manual. If there is something you do not understand, or certain informa-
tion is missing, ask your superior or contact the manufacturer. Do not do anything without
authorisation.
Contents
The ICH 256 cooled incubator is available with different configurations: If specific equipment
features or functions are available only with one of the configurations, this is indicated at the
relevant points in this manual.
Due to individual configurations, depictions in this manual may be different from the actual
appearance.
Other documents that have to be observed:
►
For control of the cooled incubator with the Memmert PC software “Celsius“, please refer
to the enclosed, separate manual.
►
For service and repair work (see page 68 ), please refer to the separate service manual.
Storage and forwarding
This instruction manual belongs to the cooled incubator and should always be stored where
persons working on the appliance have access to it. It is the responsibility of the owner to
ensure that persons who are working or will work on the appliance are informed as to the
whereabouts of this instruction manual. We recommend that it is always stored in a protected
location close to the cooled incubator. Make sure that the instruction manual is not damaged
by heat or humidity. If the cooled incubator is sold on or transported and then set up again at
a different location, this manual must also go with it.