Memmert ICH 256 Climate Chambers (Generation 2003) - Manual (Page 28)

28
Operation and Control
5.7 Basic operation
The desired parameters are entered on the operating panel of the controller on the front of
the appliance ( Fig. 15 ). Basic settings, as well as those for time and pressure, can also be made
here. In addition, programmed and current parameters are displayed, as well as warning mes-
sages:
4
3
2
1
STERI DEFRO
2
IN 1 IN 2 OUT IN 1 IN 2 OUT
PRINT SETUP
loop
t3
t4 t2
t1
on
off
Mo Tu We Th Fr Sa Su
°C °C
MIN
AUTO
MAX
h
set
off
on push card
rh
mb
% CO
mb
2
IN 1 IN 2 OUT OUT
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Fig. 15 Operating panel
1 Time display
2 Operating mode display (see page
Time display Time display
29 Operating mode display (see page Operating mode display (see page ) 29 29
3 Display appliance is heating up
Operating mode display (see page Operating mode display (see page
4 Temperature display
Display appliance is heating up Display appliance is heating up
5 Display: appliance is cooling down
Temperature display Temperature display
6 Alarm display (see chapter
Display: appliance is cooling down Display: appliance is cooling down
7.3 ) 7.3 7.3
7 Temperature monitoring display (see
Alarm display (see chapter Alarm display (see chapter
chapter
Temperature monitoring display (see Temperature monitoring display (see
7.3 ) 7.3 7.3
8 Humidity display
chapter chapter
9 Setting the CO
Humidity display Humidity display
2
setpoint (only for models
Humidity display Humidity display
with CO
Setting the CO Setting the CO
2
supply)
Setting the CO Setting the CO
22
setpoint (only for models setpoint (only for models
10 Display: appliance is humidifying
11 Display: water tank empty
Display: appliance is humidifying Display: appliance is humidifying
12 Display: fan speed
Display: water tank empty Display: water tank empty
13 Card reader
Display: fan speed Display: fan speed
14 Push/turn control
15 Set key
16 Text display and (for appliances with inte-
Set key Set key
rior lighting) Display: interior lighting
Text display and (for appliances with inte- Text display and (for appliances with inte-
All operating functions are selected by turning the push-turn control to the
left or right...
...and adjusted by turning with the SET key held down.
set
set