MacDon CA20 Operators Manual - Manual (Page 19)

ADAPTER AND CASE 2300, 2500 SERIES
Form 169009 17 Model Year - 2009
h. If adapter is equipped with reel fore-aft/header
tilt selector, disconnect harness (J) and store on
combine.
i. Disconnect hydraulics as follows:
1. Disconnect reel drive hoses (K) and (L)
(white discs) from adapter and combine
receptacles.
2. Connect hose (L) from combine to combine
coupler (M).
3. Connect hose (N) from the adapter to the
adapter coupler (O).
4. Disconnect reel lift hose (P) (black disc) on
combine and attach red dust cap. Store
hose on adapter.
CAUTION
Do not connect reel lift hose and reel fore-
aft hose to couplers on adapter. Doing so
may cause reel to inadvertently shift during
transport.
(continued next page)
P
P
L
K
M
L
J
O
N