MacDon CA20 Operators Manual - Manual (Page 60)

OPERATION
Form 169009 58 Model Year - 2009
7.3 OPERATING PROCEDURES
7.3.1 PRE-SEASON CHECK
Perform annual maintenance. See Section
8.13, Maintenance Schedule, and perform the
following the beginning of each operating
season:
CAUTION
• Review the Operator's Manual to refresh
your memory on safety and operating
recommendations.
• Review all safety signs and other decals
on the windrower and note hazard areas.
• Be sure all shields and guards are
properly installed and secured. Never
alter or remove safety equipment.
• Be sure you understand and have
practiced safe use of all controls. Know
the capacity and operating
characteristics of the machine.
7.3.2 DAILY CHECK
a. Check the machine for leaks or any parts that
are missing, broken, or not working correctly.
NOTE:
Use proper procedure when searching for
pressurized fluid leaks. Refer to Section
8.8.4, Hose and Lines.
7.3.3 PROPER OPERATION
Follow these safety precautions:
CAUTION
• Wear close fitting clothing and
protective shoes with slip resistant
soles.
• Remove foreign objects from the
machine and surrounding area.
• As well, carry with you any protective
clothing and personal safety devices
that COULD be necessary through the
day. Don't take chances.
• You may need:
- a hard hat
- protective glasses or goggles
- heavy gloves
- respirator or filter mask
- wet weather gear
• Protect against noise. Wear
a suitable hearing
protective device such as
ear muffs or ear plugs to
protect against
objectionable or uncomfortable loud
noises.
• Follow all safety and operational
instructions given in your Operator's
Manuals. If you do not have a combine
manual, get one from your dealer and
read it thoroughly.
• Never attempt to start the engine or
operate the machine except from the
combine seat.
• Check the operation of all controls in a
safe clear area before starting work.
• Stop combine engine and remove key
before adjusting or removing plugged
material from the machine. A child or
even a pet could engage the drive.
• Check for excessive vibration and
unusual noises. If there is any indication
of trouble, shut down and inspect the
machine.
• Operate only in daylight or good
artificial light.