MacDon CA20 Operators Manual - Manual (Page 24)

ADAPTER AND JOHN DEERE 60, 70 SERIES
Form 169009 22 Model Year - 2009
f. Disconnect hydraulic/electrical coupler (J) from
combine as follows:
1. Remove lynch pin (K) and slide lock (L) to
release handle (M).
2. Lift handle (M) to full vertical position to
release coupler (J) from combine.
3. Lift handle (N) on adapter, position coupler
in adapter at (O), and lower handle (N) to
lock coupler.
g. Push handle (M) toward feeder house to
disengage feeder house pin (P) from adapter.
h. Lower feeder house until saddle (Q)
disengages and clears adapter support (R).
i. Slowly back combine away from adapter.
O
N
M
R
Q
P
K
L
M
J