MacDon CA20 Operators Manual - Manual (Page 31)

ADAPTER AND LEXION
Form 169009 29 Model Year - 2009
4. Disconnect hoses (Q) and (R) on combine
at couplers.
5. Clean couplers (S) and (T) on adapter.
6. Connect hose (R) to coupler (S) on
adapter.
7. Connect hose (Q) to coupler (T) on
adapter.
h. If adapter is equipped with reel fore-aft/header
tilt selector, connect harness (U) to combine
harness (V).
i. Rotate disc (W) on adapter drive-line storage
hook and remove drive-line from hook.
j. Attach drive-line to combine output shaft (X).
k. Disengage both adapter float locks by moving
latch (A) away from adapter and moving lever
(B) at each lock to lowest position.
T
S
R
Q
U
W
V
B
LOCK
UNLOCK
A
X