MacDon CA20 Operators Manual - Manual (Page 87)

MAINTENANCE/SERVICE
Form 169009 85 Model Year - 2009
8.10.1.2 Tine Installation
a. Insert tine (D) through plastic guide (F) from
inside the auger.
b. Insert tine into bushing (E).
NOTE
The #6 tine (D) must also be inserted
through the square tube (G).
c. Secure tine in bushing with hairpin (C). Install
hairpin with closed end leading with respect to
auger forward rotation.
d. Replace access cover (B) and secure with
screws (A). Coat screws with loctite and torque
to 75 in-lbf (8.5 N·m).
F
E
D
C
B
A
G
D