MacDon CA20 Operators Manual - Manual (Page 71)

MAINTENANCE AND SERVICE
Form 169009 69 Model Year - 2009
8.4 RECOMMENDED FLUIDS AND
LUBRICANTS
8.4.1 LUBRICANTS
LUBRICANT SPEC DESCRIPTION USE
High Temp.
Extreme
Pressure (EP2)
Performance
With 1% Max
Molybdenum
Disulphide
(NLGI Grade
2).
Lithium Base
As Required
Unless
Otherwise
Specified
Grease
SAE Multi-
Purpose.
High Temp.
Extreme
Pressure (EP)
Performance
With 10% Max
Molybdenum
Disulphide
(NLGI Grade
2).
Lithium Base
Driveline
Slip-Joints
Hydraulic Oil SAE
15W40 Compliant With
SAE Specs For
API Class SJ
And CH-4
Engine Oil Adapter
Drive
Systems
Gear
Lubricant SAE 85W-
140 API Service
Class GL-5 Main Drive
Gear Box
8.4.2 CAPACITIES
ITEM CAPACITY
Main Gearbox 5 Pints (2.5 liters)
Hydraulic Reservoir 16 Gallons U.S. (60 liters)
8.4.3 STORAGE
• Your machine can operate at top efficiency only
if clean lubricants are used.
• Use clean containers to handle all lubricants.
• Store lubricants in an area protected from dust,
moisture, and other contaminants.
8.5 ROLLER CHAIN INSTALLATION
CAUTION
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Locate ends of chain on sprocket.
b. Install pin connector (A) into chain, preferably
from the sprocket backside.
c. Install connector (B) onto pins.
d. Install spring clip (C) onto front pin (D) with
closed end of clip in direction of sprocket
rotation.
e. Locate one leg of clip in groove of aft pin (E).
f. Press other leg of spring clip over face of aft pin
(E) until it slips into groove. Do not press clip
lengthwise from closed end.
g. Ensure clip is seated in grooves of pins.
DIRECTION OF ROTATION
A
B
C
E
D