MacDon CA20 Operators Manual - Manual (Page 3)

Form 169009 1 Model Year - 2009
1 INTRODUCTION
This manual contains information on the MacDon Model CA20 Combine Adapter that allows attachment of the
MacDon Model D50 and D60 Harvest Header and the Model FD70 FlexDraper headers to various makes and
models of combines. This manual must be used in conjunction with your Header and Combine Operator's
Manual.
CAREFULLY READ ALL THE MATERIAL PROVIDED BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE, OR
USE THE MACHINE.
Use this manual as your first source of information about the machine. If you follow the instructions given in this
manual, your CA20 Combine Adapter will work well for many years. If you require more detailed service
information, a Service Manual is available from your dealer.
Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to
familiarize yourself with how the material is organized.
Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your dealer if
you need assistance, information, or additional copies of this manual.
NOTE: Right-hand (R/H) and left-hand (L/H) designations are determined from the operator’s position, facing
forward.
RECORD THE SERIAL NUMBER IN THE SPACE BELOW.
____________________________________
Serial Number plate is located on the frame
above the main drive gearbox.