MacDon CA20 Operators Manual - Manual (Page 46)

D50 & D60 HEADER/ADAPTER
Form 169009 44 Model Year - 2009
l. Disconnect reel hydraulics at right side of
adapter. Install caps and plugs on fittings.
m. If multi-coupler is installed, disconnect as
follows:
1. Push in lock button (O) and pull handle (P)
to release coupler (Q).
2. Push handle down until button (O) snaps
out.
3. Store hoses over adapter frame.
n. Ensure header is on ground or supported by
wheels in transport mode or jack stand.
o. Slowly back combine away from header.
p. Reinsert pins (R) in legs of header.
R
O
P
Q