MacDon CA20 Operators Manual - Manual (Page 43)

ADAPTER AND AGCO
Form 169009 41 Model Year - 2009
e. Disconnect hydraulic/electrical coupler from
combine as follows:
1. Move handle (H) to full open position to
release coupler from combine.
2. Lift handle (J) on adapter, position coupler
(K) in adapter and lower handle (J) to lock
coupler.
f. Retract lugs (L) at base of feeder-house with
lock handle (M).
g. Lower feeder house until saddle (N) disengages
and clears adapter support (O).
h. Slowly back combine away from adapter.
N
H
O
K
J
ALL EXCEPT GLEANER ‘R’ SERIES
M
GLEANER ‘R’ SERIES
M
L