MacDon CA20 Operators Manual - Manual (Page 33)

ADAPTER AND LEXION
Form 169009 31 Model Year - 2009
f. Disconnect hydraulics/electrical from adapter as
follows:
Lexion 500 Detachment
1. Unscrew knob (K) on coupler (L) to release
coupler from adapter.
2. Remove cover (M) from combine
receptacle.
3. Locate coupler (L) onto combine receptacle
(N) and turn knob (K) to secure coupler to
receptacle.
4. Place cover (M) on adapter receptacle.
5. Proceed to step h.
Lexion 400 Detachment
1. Disconnect electrical harness from adapter.
2. Disconnect hydraulic hoses (O) and (P)
from adapter connectors (Q) and (R).
3. Locate hoses (O) and (P) on combine as
shown and reconnect.
4. Unscrew knob on coupler (S) to release
coupler from adapter receptacle.
5. Remove cover (T) from combine receptacle
(U).
(continued next page)
M
K
L
N
T
U
P
O
R
Q
S