SATEC SA300 ezPAC Operation Manual - Manual (Page 111)

Chapter 9 Totalization Energy and TOU Registers Configuring TOU Daily Profiles
SA300 Substation Automation Unit 111
The available options are described in the following table:
Option Format/Range Default Description
Summary Energy/TOU Registers
Roll over 1 to 1,000,000,000 1,000,000,000 The value at which the accumulator
register rolls over to zero
TOU Enabled Unchecked
Checked Unchecked Links the summary energy register to the
parallel TOU energy register
AND SP None,
SP1-SP32 None None - no effect.
SP1-SP32 - connects the energy source to
the summary register only when setpoint
conditions are fulfilled.
Register Source List
Energy source None
kWh Import
kWh Export
kWh Total
kvarh Import
kvarh Export
kvarh Total
kVAh,
DI1-DI48,
REG1- REG16
None Links an energy source to the register
x kWh -10,000 to
10,000 1 The multiplication factor for the energy
source.
Register Reg1- Reg16 Reg1 Defines the target summary register for
the energy source
Configuring TOU Daily Profiles
To configure the TOU daily profiles, select Energy/TOU from the Meter Setup menu,
and then click on the TOU Daily Profiles tab.
The profile setup allows you to specify the daily tariff change points with a 15-minute
resolution.
To configure your daily profiles: